WRX/STI Clutch Replacement Cost

    Replace clutch disc, pressure plate, throwout bearing, and pilot bearing on 6MT WRX/STI.

    Reviewed by SubaruReview Editorial Team · Last reviewed 2026-05-10 · Editorial standards

    $1,400–$2,800national average
    Parts
    $450–$1200
    Labor
    810 hrs
    DIY-friendly?
    Yes (4/5)

    How this repair stacks up against the other common Subaru transmission jobs — useful when you're sequencing what to fix first.

    WRX/STI Clutch Replacement Cost compared with other transmission repairs on Subaru.
    RepairCost rangeLaborPartsDIY
    WRX/STI Clutch Replacement Cost (this page)$1,400–$2,8008–10 hrs$450–$12004/5
    Subaru CVT Replacement Cost$4,500–$8,5008–12 hrs$3500–$6500No
    Subaru Clutch Replacement Cost$1,450–$2,8007–10 hrs$650–$12004/5
    Costs are US national averages from our repair-cost database. DIY column is difficulty out of 5; 'No' means specialty tools required.

    This repair is part of our Subaru repair-cost database and connects back to the transmission & AWD guide where we cover service intervals and failure modes.

    Why this fails

    Stock clutch wears at 60-90k under spirited driving; tuned cars may need stage-2 clutch by 40k.

    What the job involves

    1. Drop transmission
    2. Replace clutch disc, pressure plate, throwout bearing, pilot bearing
    3. Resurface flywheel or replace lightweight aluminum
    4. Replace rear main seal while accessible
    5. Bleed clutch hydraulics

    If you delay this repair

    Slipping clutch glazes flywheel — adds $300-500 to job for resurface or replace.

    Save money

    • Exedy OEM-replacement is $400 less than ACT and lasts nearly as long for stock power
    • Independent shop labor is $800-1200 vs $1500+ at dealer
    • Replace rear main seal at the same time — $0 in extra labor

    FAQ

    How much does WRX/STI Clutch Replacement cost in 2026?

    Expect $1,400–$2,800 at most US shops, parts plus labor.

    How long does the job take?

    8–10 labor hours typically.

    Can I do this myself?

    Yes — DIY difficulty 4/5.

    What happens if I delay?

    Slipping clutch glazes flywheel — adds $300-500 to job for resurface or replace.

    Sources

    Cost, labor-hour, and parts-price ranges on this page are aggregated national-average estimates. Individual figures are not tied to a single primary source and should be treated as directional — request a written quote from a Subaru dealer or an independent Subaru specialist before booking work. See our editorial standards for how we build these ranges.

    No primary source is currently cited for the specific figures on this page. Treat quantitative details as directional pending verification — see our Corrections Policy to help us update it.

    People also ask

    Is WRX/STI Clutch Replacement cheaper at an indy shop or the dealer?

    Independent Subaru specialists usually come in $300–$1,000 below dealer pricing on the $1,400–$2,800 range shown above, without giving up OEM parts. See real quote breakdowns in the Subaru repair-costs hub.

    What actually causes this repair in the first place?

    The most common trigger is AC Compressor Failure, documented with symptoms, root cause, and a permanent-fix path. Fixing the underlying failure first is what stops you from paying for this job twice.

    Can I DIY this to save money?

    Yes — we rate it 4/5. Follow the job-steps checklist above and the money-saving tips, and cross-check the reliability hub for related failures worth inspecting while you're in there.

    How does this repair fit into overall Subaru reliability?

    It's tracked inside our Transmission & AWD cluster alongside every related failure and fix. Browse all topic hubs to see repair cost in the context of the underlying engine or drivetrain issue.

    Ready to buy or refresh your current build?

    Dig into the Problems Database to plan your next maintenance sprint, or browse every model hub for buyer's guides, generation breakdowns, and known-issue lists.